| |
|
Type |
Material |
Drilling |
Tapping |
Facing |
|
|
|
|
|
Outer diameter(mm) x Feedrate(mm/rev) |
Outer diameter(mm) x Pictch(mm) |
Peck of cut (mm2/min)
Cutting width(mm) x Deep(mm) x Feedrate(mm/min) |
HSM-850 |
ADC |
27x0.3 |
M24x2.0P |
530 : 63x5x2000 |
FC30 |
27x0.2 |
M24x1.75P |
225 : 50x2.5x1800 |
S45C |
27x0.13 |
M24x1.75P |
188 : 50x2.5x1500 |
|
|
|
|
 |
| |
 |
 |
In comparison with many different kind of tooling system in the market, the Olympic Seiki HSk-II tooling system takes most advantages form all these system : |
|
 |
 |
| |
 |
|
|
| Relative movement patent |
| |
The most important of CNC machine history that is has been a breakthrough after fifty years in the world. |
|
The mass of relatively moving parts are equally designed. the dynamic balance is better than any machine tools ever. |
|
The Relative Movement machines show very little vibration even when positioning at very high speed and very high acceleration. |
|
For vertical axis, no additional counter-measures, such as counter weight, hydraulic or pneumatic cylinders, or bigger seromotors are necessary for balancing the weight of headstock ( or traversing table ). |
|
 |
 |
|
| The productivity contrast Relative movement CNC with normal CNC |
|
|
|
Very long service lift of ball screw and support bearing less thermal displacement due to heat generation which increases with the ball screwspeed. |
|
The high accuracy can therefore be maintained without thermal effect. |
|
No extra cost for Anti-temperature-elevation measures, for example, interior or exterior coolant system. |
|
|
Laser compensation. |
|
| |
|
| |
