FCL-series
 
Page 1 Specification
 
 
 
MODEL FCL-450TM FCL-550TM FCL-580TM
Capacity No. of axis STD:5-axis OPT:7-axis (C-axis) STD:5-axis OPT:7-axis (C-axis)
 STD:5-axis OPT:7-axis (C-axis)
Swing over bed Ø600mm (23.62")

Ø620mm (24.41")

Ø 620mm (24.41")

Max. turnting dia.

Ø 220mm (8.66")

Ø440mm (17.32")

Ø 440mm (17.32")
Working length 310mm(12.20") 290mm(11.41") 270mm(10.62")
Main spindle Spindle nose bar internal taper

L:ASA A2-5

R:ASA A2-5

 L:ASA A2-6 R:ASA A2-5 L:ASA A2-6 R:ASA A2-6
Spindle bore
 Ø 56mm (2.2") Ø 56mm (2.2") Ø 61mm (2.4") Ø56mm (2.2") Ø 77mm (3") Ø 61mm (2.4")
Bar capacity
 Ø 45mm (1.7") Ø 45mm (1.7") Ø 51mm (1.7") Ø 45mm (1.7") Ø 65mm (2.6") Ø 51mm (2")
Range of spindle speed 60-6000rpm 60-6000rpm 60-4200rpm 60-6000rpm 60-4200rpm 60-4200rpm
Living tools speed 25-4500rpm 25-4000rpm 25-4000rpm
No. of spindle speed

Infinitely variable

 Infinitely variable Infinitely variable

Chuck

 Hydraulic chuck
Ø169mm (6") Ø 169mm (6") Ø 210mm (8")
Ø169mm (6") Ø 254mm (10") Ø 210mm (8")
Turret (L/R) Tool station(random)
Servo V12 160x2 Servo V12 160x2 Servo V12 160x2
O.D. tooling
20x20mm 20x20mm 20x20mm
I.D. tooling
Ø 32mm (1.26") Ø32mm (1.26") Ø32mm (1.26")

Cross Slide (X Axis) and Carriage (Z-Axis, Y-Axis)

 

 X-axis travel 160mm(6.29") 245mm(9.64") 245mm(9.64")
Y-axis travel

350mm(13.97")

 335mm(13.19") 320mm(12.6")
Z-axis travel 540mm(21.25") 520mm(20.47") 500mm(19.68")
Rapid traverse speed (X-axis) 20m/min(787ipm) 20m/min(787ipm) 20m/min(787ipm)
Rapid traverse speed (Y-axis)
20m/min(787ipm) 20m/min(787ipm) 20m/min(787ipm)
Rapid traverse speed (Z-axis)
20m/min(787ipm) 20m/min(787ipm) 20m/min(787ipm)
Cutting feed rate (X and Z axis)
0.001-500mm/rev. 0.001-500mm/rev. 0.001-500mm/rev.
Motor Main spindle (continuous)

P12i 1500-6000rpm

 5.5kw(7.5HP)

P18i 750-6000rpm

 9kw(12HP)

P22i 1500-6000rpm

 11kw(15HP)
Main spindle (30 min. rating) 7.5kw(10HP) 11kw(15HP) 15kw(20HP)
Sub spindle (continuous)

6i 1500-6000rpm

 5.5kw(7.5HP) 6i 1500-6000rpm 5.5kw(7.5HP) 8i 1500-6000rpm 7.5kw(10HP)
Sub spindle (30 rating) 7.5kw(10HP) 7.5kw(10HP) 11kw(15HP)
Zm, Zs-axis 8i/3000 1.6kw(2.15HP)x2 8i/3000 1.6kw(2.15HP)x2 8i/3000 1.6kw(2.15HP)x2
Xm, Xs-axis 8Bi/3000 1.6kw(2.15HP)x2 12Bi/3000 3kw(4HP)x2 12Bi/3000 3kw(4HP)x2
Y-axis 8i/3000 1.6kw(2.15HP) 8i/3000 1.6kw(2.15HP) 8i/3000 1.6kw(2.15HP)
Hydraulic pump 1.5kw(2HP) 1.5kw(2HP) 1.5kw(2HP)
Coolant pump 750w(1HP)x2 750w(1HP)x2 750w(1HP)x2
Tank Capacity Hydraulic tank 65 Liter 60 Liter 60 Liter
Coolant tank 100 Liter 100 Liter 100 Liter
Measurements Floor space (LxW) 4000x2100mm 4000x2100mm 4000x2100mm
Height 2130mm 2130mm 2220mm
Weight(NW/GW) 5700kg / 6700kg 5750kg / 6750kg 5850kg / 6850kg
L&W Machine Tools Inc. reserves the right to alter any mechanical specification without prior notice in the interests of product development.

Standard Accessories:

•  High pressure cooling system (3 bar)

•  100 Liter capacity cooling tank

•  Servo turret 12-position, type:SM-16

•  Auto Lubrication system

•  Tool Kit

•  Work Light

•  Tricolor alarm light

•  Hydraulic unit

•  Heat exchanger for electric cabinet

•  Chip conveyor and bucket

•  Hydraulic tailstock

 

Optional Accessories:

•  C.E. electric control

•  Auto tool setter measurement

•  Manual tool length measurement

•  C-axis contour capability
a. Duplomatic SMBR-16 radial, VDI30, 12-position power turret with Fanuc alpha servo motor (excluding rotating tool holder and tools)
b. High resolution magnetic pulse coder incorporated into main AC spindle motor for precision contour / index control
c. Hydraulic disk brake for locking and stabilization during milling and contouring

•  Main transformer

•  Safety door interlock

•  Auto parts catcher

•  Prevent crash install of each axis (safety equipment)

•  Bar feeder interface

•  Parts cut off detector

MODEL
FCL-450TMs
FCL-550TMS
FCL-580TMS
Capacity No. of axis
STD:3-axis OPT:4-axis (C-axis)
STD:3-axis OPT:4-axis (C-axis)
STD:3-axis OPT:4-axis (C-axis)
Swing over bed
Ø600mm (23.62")
Ø630mm (24.80")
Ø630mm (24.80")
Max. turnting dia.
Ø 280mm (11.02")
Ø 490mm (19.29")
Ø 470mm (18.50")
Working length
260mm(10.23")
510mm(20.07")
460mm(18.10")
Main and sub. spindle Spindle nose bar internal taper

L:ASA A2-5

R:ASA A2-5

 L:ASA A2-6 R:ASA A2-5 L:ASA A2-8 R:ASA A2-5
Spindle bore
 Ø 56mm (2.2") Ø 56mm (2.2") Ø 61mm (2.4") Ø56mm (2.2") Ø 90mm (3.54") Ø 61mm (2.4")
Bar capacity
 Ø 45mm (1.7") Ø 45mm (1.7") Ø 51mm (2") Ø 45mm (1.7") Ø 77mm (3") Ø 51mm (2")
Range of spindle speed 60-6000rpm 60-6000rpm 45-4200rpm 60-6000rpm 35-3500rpm 42-4200rpm
Living tools speed 25-4000rpm 25-4000rpm 25-4000rpm
No. of spindle speed

Infinitely variable

 Infinitely variable Infinitely variable

Chuck

 Hydraulic chuck
Ø169mm (6") Ø 169mm (6") Ø 210mm (8")
Ø169mm (6") Ø 254mm (10") Ø 210mm (8")
Turret (L/R) Tool station(random)
STD:Hyd LS-240-12T OPT:Servo LS-200-12T
O.D. tooling
20x20mm 20x20mm 25x25mm
I.D. tooling
Ø 32mm (1.26") Ø32mm (1.26") Ø40mm (1.57")

Cross Slide (X Axis) and Carriage (Z-Axis, Y-Axis)

 

 X-axis travel 180mm(7.08") 280mm(11.02") 280mm(11.02")
Y-axis travel

270mm(10.62")

 520mm(20.47") 480mm(18.90")
Z-axis travel 280mm(11.02") 550mm(13.30") 500mm(19.68")
Rapid traverse speed (X-axis) 20m/min(787ipm) 20m/min(787ipm) 20m/min(787ipm)
Rapid traverse speed (Y-axis)
20m/min(787ipm) 20m/min(787ipm) 20m/min(787ipm)
Rapid traverse speed (Z-axis)
20m/min(787ipm) 20m/min(787ipm) 20m/min(787ipm)
Cutting feed rate (X and Z axis)
0.001-500mm/rev. 0.001-500mm/rev. 0.001-500mm/rev.
Motor Main spindle (continuous)

P12i 1500-6000rpm

 5.5kw(7.5HP)

P18i 1500-6000rpm

 9kw(12HP)

P22i 750-6000rpm

 11kw(15HP)
Main spindle (30 min. rating) 7.5kw(10HP) 11kw(15HP) 15kw(20HP)
Sub spindle (continuous)

6i 1500-6000rpm

 5.5kw(7.5HP) 6i 1500-6000rpm 5.5kw(7.5HP) 8i 1500-6000rpm 7.5kw(10HP)
Sub spindle (30 rating) 7.5kw(10HP) 7.5kw(10HP) 11kw(15HP)
Zm, Zs-axis 8i/3000 1.6kw(2.15HP) 8i/3000 1.6kw(2.15HP) 12i/3000 3.0kw(4HP)
Xm, Xs-axis 8Bi/3000 1.6kw(2.15HP) 8Bi/3000 1.6kw(2.15HP) 12Bi/3000 3kw(4HP)
Y-axis 8i/3000 1.6kw(2.15HP) 8i/3000 1.6kw(2.15HP) 8i/3000 1.6kw(2.15HP)
Hydraulic pump 1.5kw(2HP) 1.5kw(2HP) 1.5kw(2HP)
Coolant pump 750w(1HP) 750w(1HP) 750w(1HP)
Tank Capacity Hydraulic tank 60 Liter 60 Liter 60 Liter
Coolant tank 80 Liter 100 Liter 100 Liter
Measurements Floor space (LxW) 3750x2000mm 4000x2100mm 4000x2100mm
Height 2000mm 2130mm 2130mm
Weight(NW/GW) 4550kg / 5470kg 5210kg / 6200kg 5700kg / 6700kg
L&W Machine Tools Inc. reserves the right to alter any mechanical specification without prior notice in the interests of product development.
 
 

Standard Accessories:

•  High pressure cooling system (3 bar)

•  100 Liter capacity cooling tank

•  Servo turret 12-position, type:SM-16

•  Auto Lubrication system

•  Tool Kit

•  Work Light

•  Tricolor alarm light

•  Hydraulic unit

•  Heat exchanger for electric cabinet

•  Chip conveyor and bucket

•  Hydraulic tailstock

 

Optional Accessories:

•  C.E. electric control

•  Auto tool setter measurement

•  Manual tool length measurement

•  C-axis contour capability
a. Duplomatic SMBR-16 radial, VDI30, 12-position power turret with Fanuc alpha servo motor (excluding rotating tool holder and tools)
b. High resolution magnetic pulse coder incorporated into main AC spindle motor for precision contour / index control
c. Hydraulic disk brake for locking and stabilization during milling and contouring

•  Main transformer
•  Safety door interlock
•  Auto parts catcher
•  Prevent crash install of each axis (safety equipment)
•  Bar feeder interface
•  Parts cut off detector
•  Larger spindle motor
•  Larger hydraulic chuck
•  Servo turret LS-240SV

 
 
 
 
Factory:  No. 53, Ho Tso St., Feng Yuan, Taiwan
Export Office:  9F-8, No. 62, Ta Ya Rd., Taichung, Taiwan
Tel:  886-4-22014701
Fax:  886-4-22036013, 886-4-22070371
e-mail: sales@lw-machinetools.com
e-mail:  lwmachin@ms31.hinet.net