| |
|
| |
Characteristic Or Cross-Rail Upon-down
The cross rail (W axis) could move upon the height of working piece, to increase the efficiency of machining, save the production cost and enlarge the production range.
Superb machining ability
The cross rail could be close to working piece, make sure the shortest extend-ing length of spindle, increasing the performance of macgining, and extend the lifetime of tooling.
High flexibility features
When ATC is equipped, the command of tool change could be executed at any position, and the user have several different choices of ATC numbers.
strong structure
Both cross rail and column were equipped with hydraulic locking system ensure the cross rail and column matched closest, high rigidity and high accuracy.
|
|
 |
 |
|
Controller cabinet
No-shape design cabinet of controller to avoid any accident during operation. Single-unit controling button could be replaced separately when it was damaged, Background light makes sure the correct operation under the dark operation environment. |
|
|
|
|
 |
 |
Y axis
Parallel slide ways design for Y axis, accompanying with both Roller and Flat type tracker. The linear guide ways keep the sensibility of high-speed moving, and flat type tracker offers higher loading capacity. |
Cross rail
One-piece Cross rail, high rigidity structure design, Crossing Rib design for rear part.
Accompanying bridge type outline, it could support the verical force of gravity and horizontal resistance, to make sure the best rigidity in machining process. |
 |
 |
Pendant arm of controller cabinet (optional)
Friendly design of pendant arm. the cabinet of controler could be moved forward-backward, upon-down, right-left, to makes sure theoperator could operated the machine in the best position. |
Characteristic of mold machining Rough molding machining
Large cutting capacity, high speed, stabilized and lower vibration.
Finished molding machining
Excelent surface, minimized error of curve / roundness, without segment mark. |
 |
|
Gear box of spindle
1. Square type design, 440x440mm dimension, high rigid structure, minimized the possibility of interference with working piece. Ladder type slide-way makes the spindle center most close to the cross rail, inceasing the stabilization of machining.
2. Gear box and Spindle housing is one-piece die-casting, ofter the best machining performance and lowest noise. |
|
|
|
|
|
|
